Chevy Silverado 1500 Hard Flip Back Tonneau Cover
★★★★★ 4.9 64 reviews- Aluminum honeycomb panels — 400 lb evenly-distributed rating
- Locks with your tailgate — cargo stays secure
- Fold one panel, two, or the full cover for flexible bed access
- No-drill clamp-on install in under an hour with hand tools
Specifications
| Panel material | Aluminum honeycomb, powder-coated |
| Load rating | 400 lbs (evenly distributed) |
| Profile | Low-profile flush mount |
| Seals | Weather-resistant perimeter seals |
| Finish | Matte black, scratch-resistant |
| Warranty | 2-year TruckTon limited warranty |
What's in the box
Installation — no drilling
Warranty & returns
Tough where it matters. Built for work, made to last.
Honeycomb Aluminum Core
Exceptional rigidity without the weight. Handles 400 lbs of snow or gear.
Flexible Bed Access
Open one panel, two, or fold fully forward for oversized cargo.
Locks With Your Tailgate
Tailgate locked = cover locked. Gear stays protected wherever you park.
No-Drill Install
Pre-assembled, clamp-on hardware. One person, under an hour.
SPECIFICATIONS
| Material | Aluminum honeycomb |
| Finish | Matte black powder coat |
| Weight capacity | 400 lb (evenly distributed) |
| Installation | Clamp-on (no drill) |
| Install time | Under an hour, one person |
| Warranty | 2-year limited warranty |
FITMENT
- Chevrolet Silverado 1500 2019-2026
- 5'8" and 6'6" beds
- Works with or without bed liners
- Special editions & trims: contact us to confirm fit
Frequently bought together
Chevy Silverado 1500 Hard Flip Back Tonneau Cover
Chevy Silverado 1500 Pickup Truck Bed Mat
Customer reviews
Frequently asked questions
Will this tonneau cover fit my Chevrolet Silverado 1500?
How long does installation take?
How does the locking work?
How does it handle Canadian winters?
Can I haul oversized cargo?
The hard tonneau cover built for Canadian Chevrolet Silverado 1500 owners
The Chevy Silverado 1500 Hard Flip Back Tonneau Cover is a low-profile, hard tri-fold truck bed cover engineered for the Chevrolet Silverado 1500. Reinforced aluminum honeycomb panels carry 400 lbs of evenly distributed weight, while perimeter weather seals keep rain, snow, dust and road debris out of your bed from Alberta winters to Ontario summers.
Flip-back convenience, tri-fold strength
Unlike a standard tri-fold tonneau cover, the flip-back design folds panel by panel — open one section for quick access, two for larger items, or fold the cover fully forward for oversized loads. With the tailgate locked, the cover locks too.
No-drill installation in under an hour
The clamp-on rail system installs with basic hand tools and no drilling, so there are no permanent modifications to your truck. Or get free professional installation with in-store pickup at our Ontario location.
Every TruckTon hard tonneau cover ships free anywhere in Canada, is backed by a 2-year limited warranty, and comes from a Canadian-owned company with real phone support at 1-888-651-3091.
Locks down.
Blends in.
Low-profile panels sit close to your bed rails for a near-factory look. With the tailgate locked, the cover locks too — rigid aluminum between your gear and everyone else.
Sealed against
Canadian weather.
Weather-tight perimeter seals and integrated drain tubes keep rain, slush and road salt out of the bed — and rigid panels carry a snow load that would fold a vinyl cover.
Full bed access
in seconds.
Flip back one panel, two, or fold the whole cover upright against the cab and secure it with the built-in prop rods — haul oversized cargo without removing anything.
Armor-grade
honeycomb aluminum.
Reinforced honeycomb panels rated for 400 lbs evenly distributed, finished in a scratch-resistant textured powder coat that shrugs off dents, UV and rust.
No-drill,
one-person install.
Clamp-on rails grip your factory bed rails — no drilling, no cutting, no permanent changes. Most owners are done in under 30 minutes with basic hand tools. Or pick up in Burlington, ON and we install it free.